Device Status Query - Ebyte M02-XACX0420 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
（1）Device Settings
Advanced Settings interface, support device name setting, offset address (software address),
read parameters, enable write protection, disable write protection, restart the module, restore factory
Settings.
（2）Device Serial Port Settings
The baud rate can be 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200. The default baud
rate is 115200.
You can set the parity bit (none, parity, and parity). By default, no parity is available.

6.3 Device Status Query

The configuration software supports device status query. After the device is connected, you can
query the device status by clicking Refresh All Data.
For example: Two devices have been connected to the configuration software. Select one of
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Figure 6-2-13 Device setting interface
Figure 6-2-14
Figure 6-2-16 Checkbit setting interface
User Manual
【4AI+2DO】 MA02-XACX0420
27