Table of Contents
Advertisement
Basic Operation
Power ON-OFF
To power on the device slide the
(A)
power button
to the outmost right
position and release. The button will
stay in an intermediate position and
the indicator (LED) in the center of the
button indicates booting (by blinking
slowly).
Once the booting has finished the
indicator discontinues blinking and
remains lit. The device always boots
into "Broadcasting" mode to allow
immediate preview over SDI.
For complete shutdown slide the
power button to the outmost left
position.
WiFi
By default the device is enabling WiFi
immediately after booting is complete.
(B)
The WiFi-LED
is blinking slowly to
indicate readiness to connect.
The OZO Remote host computer
must have WiFi enabled to connect
to the OZO Camera. The WiFi-button
indicator discontinues blinking and
remains lit to indicate a successful
connection to the OZO Remote
Application.
To boot the device without WiFi
(airplane mode) press and hold the
WiFi button during startup until
booting has finished.
A
25
B
Advertisement
Table of Contents
