Lenovo ThinkPad Edge E420 1141 User Manual page 167

Lenovo thinkpad edge e420 1141: user guide
Hide thumbs Also See for ThinkPad Edge E420 1141:
Table of Contents

Advertisement

Solution: Make sure the built-in audio device is configured correctly.
For Windows 7:
1. Click Start ➙ Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. Double-click Sound, video and game controllers.
5. Make sure the following device is enabled and configured correctly:
– Conexant Pebble High Definition SmartAudio
For Windows XP:
1. Click Start ➙ Control Panel.
2. Click Performance and Maintenance
3. Click System.
4. Click the Hardware tab, and then click the Device Manager button.
5. Click the + mark for Sound, video and game controllers.
6. Make sure the following device is enabled and configured correctly:
– Conexant Pebble High Definition SmartAudio
• Problem: Recordings made by using the Microphone input are not loud enough.
Solution: Make sure that Microphone Boost is turned on and set as follows:
For Windows 7:
1. Click Start ➙ Control Panel.
2. Click Hardware and Sound
3. Click Sound.
4. Click the Recording tab in the Sound window.
5. Select Microphone, and click the Properties button.
6. Click the Levels tab, and move the Microphone Boost slider upwards.
7. Click OK.
For Windows XP:
1. Double-click the volume icon in the task bar. The Volume Control window opens.
2. Click Options.
3. Click Properties.
4. Select Conexant HD Audio input in the Mixer device list.
5. Click OK.
6. Click Options, and then click Advanced Controls.
7. Find the Microphone volume control, and then click Advanced.
8. Select the Microphone boost check box.
9. Click Close.
Note: For details about controlling volume, refer to your Windows online help.
• Problem: A volume or balance slider cannot be moved.
.
Chapter 10
Troubleshooting computer problems
149

Advertisement

Table of Contents
loading

Table of Contents