Download Print this page
A.O. Smith Conservationist ACGSS00305 Specification Sheet
A.O. Smith Conservationist ACGSS00305 Specification Sheet

A.O. Smith Conservationist ACGSS00305 Specification Sheet

A.o. smith commercial gas water heater specification sheet

Advertisement

Quick Links

LOW-NOx POWERED-BURNER MODELS
Conservationist
(BTP and BTPV) commercial water heaters offer precise
®
powered-burner performance for medium-demand commercial applications,
plus the flexibility of conventional atmospheric venting, sidewall venting or
direct venting. To help ensure optimum performance, A. O. Smith offers
professional start-up service on BTP and BTPV models.
VENTING OPTIONS
• BTP models designed for conventional atmospheric vertical venting.
Barometric draft regulating damper provided. Order Vent Kit Part # 170777-005.
• BTPV models designed for horizontal atmospheric sidewall venting or direct venting,
using optional vent kits.
• For sidewall venting order Vent Kit Part # 192049-000.
• For direct venting order Vent Kit Part # 192050-002.
LOW-NOx POWERED GAS BURNER (NATURAL GAS ONLY)
• Pre-mix design with internal Flue Gas Recirculation (FGR)
• Safety features include internal blocked flue sensor, separate pilot
system, internal thermal cutoff and anti-flashback barrier
FULLY AUTOMATIC CONTROLS
• Including safety shut-off, high-temperature limit control
• Dual thermostat, adjustable from 120º F to 180º F
DRAFT EQUALIZING COMBUSTION CHAMBER
• Patented dome system ensures optimum flue loading and efficient heat
transfer by balancing pressure inside combustion chamber
ASME TANK CONSTRUCTION ON ALL MODELS
• Rated working pressure: 160 PSI
FACTORY-INSTALLED AGA/ASME TEMPERATURE & PRESSURE
RELIEF VALVE
GLASS-LINED TANK WITH MULTIPLE ANODE RODS
• For optimum protection against tank corrosion
FLAME INSPECTION PORT
HANDHOLE CLEANOUT
• For easy cleanout of sediment from tank bottom
HIGH-ALTITUDE INSTALLATION
• Adjustable air intake damper easily reset for high-altitude installation by
authorized start-up agent
CODES AND STANDARDS
• Meets ASHRAE/IESNA 90.1-1999 thermal efficiency and standby loss requirements
• Meets SCAQMD R1146.2 low-NOx requirements
WARRANTY
• Three-year limited tank warranty
• For complete warranty information, consult written warranty shipped with
water heater, or contact A. O. Smith Water Heaters
Commercial Gas Water Heaters
®
ACGSS00305
Sept 2006R

Advertisement

loading

Summary of Contents for A.O. Smith Conservationist ACGSS00305

  • Page 1 • Meets ASHRAE/IESNA 90.1-1999 thermal efficiency and standby loss requirements • Meets SCAQMD R1146.2 low-NOx requirements WARRANTY • Three-year limited tank warranty • For complete warranty information, consult written warranty shipped with water heater, or contact A. O. Smith Water Heaters Commercial Gas Water Heaters ® ACGSS00305 Sept 2006R...
  • Page 2 Burner(s) must be factory-installed, tested and started by an A. O. Smith Authorized BTP Start-up Agent before being placed into operation. www.hotwater.com 500 Tennessee Waltz Pkwy, Ashland City, TN 37015 ©2006 A.O. Smith Corporation Commercial Gas Water Heaters ® RECOVERY-GALLONS FIRST PER HOUR AT °F...

This manual is also suitable for:

Conservationist btp 540aConservationist btpv 540aConservationist btp 650aConservationist btpv 650aConservationist btp 740aConservationist btpv 740a