× Bookmark added
Download Print This Page

IBM ThinkPad A22m 2628 Hardware Maintenance Manual: Beep Symptoms; No Beep Symptoms

Lenovo thinkpad a22m 2628: hardware guide.
Hide thumbs


Beep symptoms

Symptom or error
One beep and a blank,
unreadable, or flashing LCD.
One long and two short beeps,
and a blank or unreadable
Two short beeps with error
Two short beeps with blank
Two or more beeps, or a
continuous beep. Operating
System starts successfully.
Three short beeps, pause,
three more short beeps, and
one short beep.
Only cursor appears.
No beep symptoms
Symptom or error
No beep, power-on indicator
on, LCD blank, and no POST.
No beep, power-on indicator
on, and LCD blank during
The power-on password
The hard-disk password
The DOS full screen looks
FRU or action, in sequence
1. Reseat the LCD
2. LCD assembly.
3. External CRT.
4. System board.
1. System board.
2. LCD assembly.
3. DIMM.
POST error. See "Numeric
error codes" on page 47.
1. System board.
2. DIMM.
If a mini-PCI Ethernet card is
installed, confirm that Alert On
LAN 2 in IBM BIOS Setup
Utility is disabled.
1. DIMM.
2. System board
Reinstall operating system.
FRU or action, in sequence
1. Make sure that every
2. DIMM.
3. System board.
1. Reseat DIMM.
2. System board.
A power-on password or a
supervisor password is set.
Type the password and press
A hard-disk password is set.
Type the password and press
Start the ThinkPad
Configuration program and set
the Screen expansion
ThinkPad A22m wireless models
Symptom-to-FRU index
connector is connected
tightly and correctly.


Table Of Contents

   Related Manuals for IBM ThinkPad A22m 2628

This manual also for:

Thinkpad a20m, Thinkpad a21m

Comments to this Manuals

Symbols: 0
Latest comments: