Chapter 4. Using The Setup Utility; Starting The Setup Utility Program; Viewing And Changing Settings; Copyright Lenovo - Lenovo ThinkCentre A58 5473 User Manual

Lenovo thinkcentre a58 5473: user guide
Table of Contents

Advertisement

Chapter 4. Using the Setup Utility

The Setup Utility program is stored in the electrically erasable programmable
read-only memory (EEPROM) of your computer. The Setup Utility program is used
to view and change the configuration settings of your computer, regardless of
which operating system you are using. However, the operating system settings
might override any similar settings in the Setup Utility program.

Starting the Setup Utility program

To start the Setup Utility program, do the following:
1. If your computer is already on when you start this procedure, shut down the
2. Press and hold the F1 key, and then turn on the computer. When you hear
The Setup Utility might start automatically when POST detects that hardware has
been removed or new hardware has been installed in your computer.

Viewing and changing settings

The Setup Utility program menu lists items that identify system configuration
topics. To view or change settings, see "Starting the Setup Utility program."
When working with the Setup Utility program menu, you must use the keyboard.
The keys used to perform various tasks are displayed at the bottom of each screen.

Using passwords

By using the Setup Utility program, you can set passwords to prevent
unauthorized access to your computer and data. The following types of passwords
are available:
v Power-On Password
v Administrator Password
You do not have to set any passwords to use your computer. However, if you
decide to set any passwords, read the following sections.
© Copyright Lenovo 2009
operating system and turn off the computer.
multiple beeps, release the F1 key.
Notes:
a. If you are using a USB keyboard and the Setup Utility program does not
display using this method, repeatedly press and release the F1 key rather
than leaving it pressed when turning on the computer.
b. If a Power-On Password or an Administrator Password has been set, the
Setup Utility program menu is not displayed until you type your password.
For more information, see "Using passwords."
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents