Related Manuals for iLoq D50S.531.SB
Summary of Contents for iLoq D50S.531.SB
- Page 1 D50S.531.SB EUROPROFILE HALF CYLINDER FOR SWING HANDLE MOUNTING AND CARE INSTRUCTIONS USER GUIDE iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •...
-
Page 2: Table Of Contents
CLOSING ....................7 7 CYLINDER EXTENSION ..............7 8 GENERAL NOTES ................9 9 DECLARATION OF CONFORMITY ........... 9 iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •... -
Page 3: Before Installation
3 CARE The product is designed to be maintenance-free. It does not require any regular maintenance. iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •... -
Page 4: Installation D50S.531 In Swing Handles
Turn the knob clockwise until the cam is pointing to the 6 o’clock position. 3. Slide the lock cylinder into the swing handle. 4. Fix the cylinder into the swing handle by using the iLOQ fixing screw from the package (A10.155). -
Page 5: Knob Change
2. Remove the current knob 3. Attach the new knob 4. Tighten the fixing screw (1.5 Nm tightening torque) iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •... -
Page 6: Instructions For Use
Turn ~40° 3. Pull the lever and open the door. iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •... -
Page 7: Closing
Remove the three body fixing screws with a Torx T6 tool. Pull the lock unit apart. iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •... - Page 8 Fix the lock unit onto the cylinder using 3 fixing screws with a Torx T6 tool. Tighten the screws. Use a tightening torque of 0.55…0.65 Nm. iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy • ©2022 iLOQ Oy. All Rights Reserved •...
-
Page 9: General Notes
6. The key is to be kept securely so that only authorized person may have access. 7. In case of losing a key, blocklisting of the lost key shall be done with the iLOQ Manager software and affected locks shall be reprogrammed.
Need help?
Do you have a question about the D50S.531.SB and is the answer not in the manual?
Questions and answers