LG DU-27FB32C Installation And Operating Manual, Warranty page 44

Installer Menu
Installer Menu Items 89-I through 103-I
Menu Function Value
Item Range
89-I. POKE ENABLE 0 / 1
90-I. KEY LOCK 0 / 1
91-I. NOT USED
92-I. NOT USED
93-I. NOT USED
94-I. NOT USED
95-I. AUDIO MD DISP 0 / 1
96-I. NOT USED
97-I. NOT USED
98-I. NOT USED
99-I. NOT USED
100-I. ATSC TUNE MD 0 / 1
101-I. STRT MINOR CH 0 ~ 255
102-I. NOT USED
103-I. A RATIO LOCK 0 / 1
Detailed Descriptions of Installer
Menu Items
0-I. INSTALLER SEQUENCE
Gives access to Installer Menu depending on the
code selected.
0 = 9876 1 = 4321
2 = 1478 3 = 3698
1-I. POWER MANAGE (Power Management)
Determines hours of no activity before automatic
shutoff. The POWER MANAGE function is for saving
energy. When set to 0, Power Manage is OFF.
Settings range from 0 - 7, with 1 - 7 representing
the hours that the TV will remain on, unless there
has been activity from either the control panel or
remote control.
*M.P.I. Multiple Protocol Input: LG protocol for
remote control of TV through RJ11 (M.P.I.) jack on
TV connections panel.
2-I. AC ON (AC Power Switchable)
Allows the TV to turn ON just by applying AC
Page 44
Default Brief Description of Function and Comments
Value
0 When set to 1, writing to Non - volatile memory
through M.P.I. is enabled.
0 When set to 1, front keyboard functionality is disabled.
1 When set to 1, Audio Mode Information is enabled to
appear in the Channel Time Display.
0 Sets ATSC tuning mode. Set to 0 for virtual channel,
set to 1 for physical channel.
0 Sets the starting minor channel. For NTSC set to 0.
If not 0, sets minor channel number. Set to 255 to
show last tuned channel at turn on.
0 Set to 1, to retain current aspect ratio at turn off.
At turn on, last set aspect ratio will be used. Set to 0 to
reset picture aspect ratio to default at TV turn on.
power. Pressing the ON button is not necessary.
This is desirable when the TV is plugged into a
cable box or a power outlet controlled by a wall
switch. Use ADJ to select 0 or 1, where 0 is the
default is OFF, and 1 is ON.
NOTE: When set to 1 (ON), the TV does not respond
to ON/OFF commands from either the remote or
the control panel, and the SLEEP TIMER is also not
functional.
3-I. BAND/AFC (Band/Automatic Frequency
Control)
There are 8 possible settings for this option:
0 = Broadcast Fixed 4 = Broadcast AFC
5 = CATV Fixed
6 = HRC Fixed
7 = ICC Fixed
Channels are accessed faster when fixed modes are
used. The AFC (search modes) should only be used
when some channels are not on nominal frequen-
cies. NOTE: BAND is automatically set by AUTO
1 = CATV AFC
2 = HRC AFC
3 = ICC AFC