Page 1
G-Axis 5000 Gimbal Support Handheld Camera Stabilizer (FLCM-GX-5000) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2
G-Axis 5000 Gimbal Support Setup Insert the Flycam G-Axis 5000 Stabilizer into the Base Weight Platform. Then rotate the Flycam G-Axis 5000 Stabilizer and tighten it properly as shown in the image. Then insert the weights into the base platform, as shown in the image.
Page 3
& vest. Loosen the knob and bolt using a 3/16” Allen Key. Now increase the height of the Flycam Stabilizer. It offers a great range of handle height NOTE: adjustment, which lets you achieve an ideal balance &...
Page 4
3/8"-16 and 1/4"-20 screws for mounting. Then insert the P-QRG into the Gimbal’s handle and secure it properly with a screw driver. Mount the Gimbal (Not Included) onto the Flycam Stabilizer and secure it by tightening the knob.
Page 5
Now loosen both the knobs of the Base Weight Platform, as sown in the image. Then to balance the Flycam Stabilizer, move the Base Weight Platform and properly tighten it from both the knobs.
Page 6
& create cinematic jib shots transitioning from low to high-angle & high to low-angle. YOUR FLYCAM G-AXIS 5000 GIMBAL SUPPORT CAMERA STABILIZER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase.