Emptying The Dirty Water Tank - Bissell REVOLUTION PET PRO 20666 Manual

Emptying the Dirty Water Tank

1.
Press tank handle
and tilt tank toward
you. Grab handle
and tank with both
hands and pull up
and away to remove.
After-Cleaning Care
Rinsing the Machine
1. Rinse out the clean water tank to remove formula. Fill tank with warm tap water. Twist cap back on tightly.
2. Turn machine ON and press trigger for 15 seconds while making back and forth passes on a section of
carpet. Release the trigger and extract the water. See above to clean the dirty water tank.
Cleaning the Brush & Nozzle
1. Press two release buttons
and lift up to remove cover.
4.
Reinstall cover by pushing
down until both sides
WARNING
electrical outlet before performing maintenance or troubleshooting.
8 global.BISSELL.com
2. Empty the tank. Quick empty: Pull the rubber tab and
tilt to pour. When closing, ensure tab is sealed tight.
Final clean and rinse: Unscrew ring at bottom of tank.
Remove and rinse float stack. Reinstall float stack by
aligning arrows and lock into place. Twist and lock ring to
keep water from leaking.
2. Rinse the nozzle. Use the
clean out tool to unclog debris.
click.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
Important:
The float stack
prevents your
dirty tank from
overflowing.
3.
red filter
below the tank
by wiping off
any remaining
dirt or debris.
3. Use the comb to brush out
debris from the brush rolls.
Clean the