PAULSON Heat Reflective Quick View Shield Series
QVGHC-6, QVGHCFM-6, QVGHCFM-4
1. Introduction
This document provides all necessary information to use and maintain PAULSON Heat Reflective Quick
View Shield Quick View Series products. To be properly protected you must carefully study this manual
before use! Failure to follow these instructions can result in a permanent impairment of sight or other
serious personal injury. For the Declaration of Conformity (DoC) enter the article number as shown above
to the search field at https://www.paulson-international.com.
2. General Warnings
Use by skilled persons as per your Hazard and Risk Analysis only (see Chapter 16).
Only use as a kit.
Only use original replacement parts.
Make sure that your workplace is sufficiently illuminated.
Free head movement and personal view may be affected.
Insufficient packing may decrease the level of protection. Thus, follow the instructions as per
Chapter 9.
The following warnings are standard warnings as per EN 166:
Material which may come in contact with the wearer's skin could cause allergic reactions to
susceptible individuals. (REMARK: PAULSON carefully selects the materials and is not aware of
any allergic reaction so far.)
The PAULSON Heat Reflective Quick View Shield protects against high speed particles. The
protector shall only be used against high speed particles at room temperature.
When worn over standard ophthalmic spectacles, they may transmit impacts, thus creating a
hazard to the wearer.
3. Field of Application
The PAULSON Heat Reflective Quick View Shield, together with additional PPE appropriate for the afore
determined level of protection, protects the qualified user minimizing the effects of radiant heat sources to
eyes and partly the face, when correctly selected, used and combined with further appropriate PPE. They
are not intended to be used for protection against laser radiation.
Despite of the fact that the short PAULSON Heat Reflective Quick View Shields can be worn as stand-
alone face shields, they are mainly designed to be combined with other, e.g. larger clear or tinted face
shields (→ 'Base Shield' see Chapter 7).
WARNING: The PAULSON Heat Reflective Quick View Shield is designed to protect against the radiant
heat source, e.g. as emitted by molten metal or hot solids at an average temperature of up to 1150°C
©
Paulson Manufacturing Corporation 2020
User Information & User Manual
ANSI Z87.1+; EN 166:2001; EN 171:2002
Product Code
QVGHC-6
QVGHCFM-6
QVGHCFM-4
CB2-HD
CB2-HD-CT (Euro Clip)
CB6-HD
Errors and technical changes reserved
Part Number
2040124
2040125
2030100
9004860
9004870
9005212
Page 1 of 5