Operation Mode Selection - LG LS-J07 Series Owner's Manual

About the remote control on the system
The remote control transmits the signals to the system.
Features of the Remote Control- Door Opened
5
4
ON OFF
7
8
SET CANCEL
9
2
14
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
Signal transmitter
6
1
3
10
11
12
PLASMA
13
15
Flip-up door
(opened)
)
START/STOP BUTTON
1
Operation starts when this button is pressed
and stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING
3
BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and
set the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
8
Used to adjust the time. (See page 12)
TIMER SET/CANCEL BUTTONS
9
Used to set the timer when the desired time
is obtained and to cancel the Timer
operation. (See page 12)
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
(See page 12)
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling
or heating. (See page 13)
ROOM TEMPERATURE CHECKING
12
BUTTON
Used to check the room temperature.
PLASMA(OPTION)
13
Used to start or stop the plasma-purification
function. (See page 11)
HORIZONTAL AIRFLOW DIRECTION
14
CONTROL BUTTON
(NOT ON ALL MODELS)
Used to set the desired horizontal airflow
direction. (See page 13)
RESET BUTTON
15
Used prior to resetting time or after replacing
batteries.
5