OOBIK B SHARK Instruction Manual

SIMULTANEOUS MEASUREMENT DUAL SENSOR
S P E E D & C A D E N C E
https://oobik.bike
1. Specification
Product : Cycling Speed & Cadence Dual Sensor
Model : B SHARK (BS-50)
Size : 48 x 43 x 27 mm
Weight : 25g ( Incl. Battery & Magnet )
Battery type : CR2032 (DC 3V)
Battery Life : Up to 600h
Temperature : -20℃ to 60℃
Range : 120km/h, 260rpm
Wireless : Bluetooth 5.0, ANT+
3. Component
LED display
CR 2032
Battery
Sensor
4. Battery install / Replace
1 2
and
1 Remove Battery cover :
2 Inserting battery : Remove the insulating paper attached to the (-) terminal of the CR2032 battery and insert it into the battery cover.
Insert the center point of
3 Insert Battery Cover :
4 Confirm operation : Battery contact and green LED flashing. (※ Refer to' 8. LED Display Status' )
5 Dual lock pad attachment : Remove protective film on the back of the dual lock pad and attach it to the left and right grooves of the sensor's battery
cover.
5. Install position & Check magnet detection.
Check : Before attaching the dual lock pad, refer to '6. Installation'to check whether detects a magnet for each sensor.
Speed Sensor
or
(Spoke magnet) (Ring magnet)
※Refer to '8. LED display status'
Cadence magnet
(pedal)
Body rubber ring
X 2ea
※When inserting the battery cover, make sure to check the mark on the cover before installing.
Remove insulation
3
paper.
CR2032
rotate consistently to separate the cover.
and to match
Cadence Sensor
Crank arm
pedal
(Cadence magnet)
Cadence
magnet
Warning
•This product contains a coin / button cell battery.
•If the coin / button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
•Keep new and used batteries away from children.
•If the battery compartment does not close securely, stop using the
product and keep it away from children.
•If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
2. Warranty & Service
•This product was shipped after its own quality/management
inspection and is sold in accordance with consumer compensation
regulations.
•The warranty period is one year from the date of purchase of the
product
In the event of a failure in normal use within the warranty period, contact
the service center and send the receipt and product to us for free of
charge.
•Paid service items
①Products that warranty has expired..
②Failure/damage cause by user negligence or accident
Ring magnet Dual lock pad
(air inlet) (For sensor)
Small rubber ring
(For ring magnet)
4
press to close completely,
Cadence / Spoke magnet
detection distance
Spoke
Max 25mm
magnet
Sensor
Max
32mm
Spoke
< MTB, hybrid bike >
Spoke magnet
Dual lock pad
(For frame)
5
and install the cover to match
Ring magnet detection distance
Max10mm
Crank arm
Sensor
pedal
Cadence
Presta valve
magnet
< Road bike >
and .
Ring
magnet