vSpin Owner's Manual

Thank you for your
purchase of vSpin!
v S p i n w a s c r e a t e d b e c a u s e I b e l i e v e t h a t
e v e r y g l a s s o f w i n e s h o u l d b e e n j o y e d a t
i t s fi n e s t .
W e h o p e o u r v S p i n e n h a n c e s y o u r w i n e
O P E N Y O U R W I N E ®
e x p e r i e n c e f o r m a n y y e a r s t o c o m e .
C h e e r s ,
Premium German Crystal
Wine Aeration System
OWNER'S MANUAL C H A R N R A I , F O U N D E R
B E V S T I R U S A I N N O VAT I O N S I N C .
We invite you to submit your vSpin
results on the spindex at: www.vspin.us
vSpin Components vSpin Base
The vSpin base is a battery-powered digital controller that modifies
vSpin Ba se the speed and duration of aeration.
Lead -Free vS pin/Spi ege lau
M
Crysta l De ca nter
Power Mode:
Foodsa fe M agn etic S pinn er
ON/OFF Time/Speed
- 1 Spa re
Mag netic Spin ner
Retrie ving Too l
US B Cha rg er a nd Co rd
Using vSpin
1. On the vSpin base, press the power button to turn it on.
The vSpin default settings are Time: 5 minutes, Speed: 2.
2. To adjust the time or speed:
a. Press the Mode button until "Time" or "Speed" appears on the display.
b. Press the Up and Down arrows until you reach the desired time/speed.
3. Place one magnetic spinner into the decanter.
4. Pour a bottle of wine into the decanter.
5. Place the decanter on the base.The wine automatically begins to aerate.
The display counts down the time.
Speed Pause /
6. Removing the decanter from the base or pressing the Pause/Resume
Up/Down Resume
button will stop the spinning, and the timer will pause.
7. Returning the decanter to the base will resume the vSpin aeration and
timer countdown or Press the Pause/Resume button to start aeration and
timer countdown.
TIME 8. To aerate for longer than 5 minutes, repeat steps above.
2:08
9. Pour the wine and enjoy!
TIPS
Pour a sample glass before decanting so you can compare
Battery Power Indicator the dramatic results
Time
Most wines are fully open after three minutes. For delicate or older
Speed display
wines, one minute at speed 1 will be enough
Try to decant off any sediment before using vSpin
Cleaning vSpin Charging vSpin
The vSpin base uses rechargeable NiMH batteries.
AFTER EACH USE, CLEAN BOTH THE DECANTER AND MAGNETIC SPINNER.
HAND WASH ONLY WITH WARM WATER ONLY To charge vSpin:
1. Insert pin side of charging cord into vSpin base,
1. Remove any leftover wine.
2. Using the magnetic spinner retrieval tool, remove the spinner connect USB side to charger.
from bottom of the decanter. 2. Plug charger into power outlet.
1 hour charge equals approximately 2 hours of use at speed level 2
3. Rinse the decanter and magnetic spinner in warm water.
4. Air dry the decanter and magnetic spinner.
5. Return the magnetic spinner in its container.
*Do not use soap as it will leave residues and fragrances behind
Troubleshooting vSpin
*For tough stains wash with plain carbonated water
Please note the vSpin uses Capacitive Switches, which are touch sensitive, keep vSpin base
Storing vSpin
dry and away from moisture.
If vSpin does not respond when you press the Power button, it must be reset.
Store the vSpin decanter with your fine china
It may need resetting after replacing batteries or being unused for a prolonged period of time.
away from strong odors such as spices.
To reset vSpin:
1. Insert pin side of charging cord into vSpin Base,
connect USB side to charger .
2. Plug charger into power outlet.
3. Press Power btutton
4. Use paperclip or toothpick to momentarily push reset button.
Caution: Do Not immerse vSpin Base in Water