Input And Output Ports - Netgate 5100 Product Manual

Getting Started
Use the following steps to configure the TNSR Secure Router.
1. To configure the Network Interfaces and gaining access to the Internet, follow the instructions provided in the
Zero-to-Ping documentation.
Note: Not all steps in the Zero-to-Ping documentation will be necessary for every configuration scenario.
2. Once the Host OS is capable of reaching the Internet, check for updates
This ensures the security and integrity of the router before TNSR interfaces are exposed to the Internet.
3. Finally, configure the TNSR instance to meet the specific use case. The topics are listed on the left column of
the TNSR Documentation
when configuring TNSR.

Input and Output Ports

Rear Side
Network Ports
Port Label
IGB0
IGB1
IX0
IX1
IX2
IX3
Note: Default Host OS Interface is enp3s0. The Host OS Interface is one network interface that is only available to
1.1. Netgate Appliances
site. There are also TNSR Configuration Example Recipes
Table 1: Netgate 5100 Network Interface Layout
Linux Label TNSR Label
enp3s0 GigabitEthernet3/0/0
enp4s0 GigabitEthernet4/0/0
enp6s0f0 GigabitEthernet6/0/0
enp6s0f1 GigabitEthernet6/0/1
enp8s0f0 GigabitEthernet8/0/0
enp8s0f1 GigabitEthernet8/0/1
Product Manual, TNSR 19.02
(Updating TNSR) before proceeding.
that might be of assistance
Port Type Port Speed
RJ-45 1 Gbps
RJ-45 1 Gbps
RJ-45 1 Gbps
RJ-45 1 Gbps
RJ-45 1 Gbps
RJ-45 1 Gbps
3