Table of Contents
Advertisement
Quick Links
Z- axis Calibration
Z-axis calibration is essential for every 3D printer. Run this test to make sure that the
building plate is leveled to the LCD screen. This is to ensure that models and prints
will adhere to the building plate.
SONIC 4K
Step 1: Remove the Resin Vat
Make sure to remove any objects present on the machine's platform.
Step 2: Prepare a piece of A4 paper and lay it flat on the LCD. This piece of paper will be
used for leveling the building plate.
Step 3: Use a wrench to loosen all 4 screws present on the sides of the building plate. After
loosening it, make sure to double-check to see if the plate is loose and movable.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Phrozen SONIC 4K
Summary of Contents for Phrozen SONIC 4K
- Page 1 LCD screen. This is to ensure that models and prints will adhere to the building plate. SONIC 4K Step 1: Remove the Resin Vat Make sure to remove any objects present on the machine's platform.
- Page 2 Step 4: Click on the Z CALIB button on your printer’s touch panel to begin the process. Wait for 1-2 minutes as the building platform extends to touch the A4 paper laying flat on the LCD. Step 5: Once the plate has touched down, press down tightly on the sides of the building plate and adjust it to make sure it is lying tight against the sheet of paper.
Need help?
Do you have a question about the SONIC 4K and is the answer not in the manual?
Questions and answers