-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync set "On" you can see the V Frequency to changes in the
OSD.
7.
VRB: To choose whether to support dynamic picture more clean control, default is Off.
---------------------------------------------------------------------------------------------------------
Note:
1. HDR setting: "Auto" is not support VRB.
2. VRB set "On", when to turn on AdaptiveSync, will auto set VRB is "Off".
3. VRB set "On", when to adjustment (Brightness, Low Blue Light, ACM), will
auto set VRB is "Off".
4. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
5. VRB setting "On", when detection of Input Timing <75Hz, will auto off the
VRB and gray out to disable.
6. VRB = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
"Normal".
8.
Aim point: Show an Aim point on the screen for shooting games.
OSD
Mode - Stardard
Picture
Language
Color
OSD Timeout
Audio
Transparency
Gaming
OSD Lock
OSD
System
Information
Save Settings to...
1.
Press the MENU key to open the OSD.
2.
Toggle to the up or down to select the functions from the OSD Page. Then toggle to the
right to navigate to the function you wish to adjust and press the enter it.
3.
Toggle to the left or right to adjust the sliding scales or to choose functions.
4.
Language: Set the OSD menu language.
5.
OSD timeout: Adjust the delay before turning off the OSD menu.
6.
Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7.
OSD Lock: To choose OSD lock on/off.
English
10
Off
Off
X