Working Safely With Your Laser Printer; Notes On Your Safety And Operating Safety - Konica Minolta PagePro 1350W User Manual

Working Safely with your Laser Printer

Notes on your Safety and Operating Safety

Working improperly with the printer can result in health hazards, electric
shocks and even fires. Before you unpack the laser printer, you should make
yourself familiar with this information on your safety and operating safety.
CAUTION
Observe the following information:
!
Make sure that the power cord is correctly plugged into the socket and
that the socket is at all times visible and readily accessible.
!
Do not pull on the cord to pull the power plug out of the socket as this may
damage the cord. The result could be an electric shock or a fire.
!
Remove the power plug from the socket if the machine will not be in use
for an extended period of time.
!
Do not remove the power cord from the socket with wet hands as this may
result in an electric shock.
68
• The socket-outlet shall be installed near the machine and
shall be easily accessible as the power plug may be diffi-
cult to pull out when an emergency occurs.
• Always use this product in a well ventilated location.
Operating the product in a poorly ventilated room for an
extended period of time could injure your health. Ventilate
the room at regular intervals.
• Whenever moving this product, be sure to disconnect the
power cord and other cables. Failure to do this could
damage the cord or cable, resulting in a fire, electrical
shock, or breakdown.
• When moving this product, always hold it by the locations
specified in the user manual or other documents. If the
unit falls it may cause severe personal injury. The product
may also be damaged or malfunction.
• Remove the power plug from the outlet more than one
time a year and clean the area between the plug termi-
nals. Dust that accumulates between the plug terminals
may cause a fire.
• When unplugging the power cord, be sure to hold onto
the plug. Pulling on the power cord could damage the
cord, resulting in a fire or electrical shock.
Safety Information