Indicator Messages; Error Messages - Konica Minolta PagePro 1300W User Manual

Indicator Messages

The control panel indicators (Ready, Error) provide information about your
printer and help you locate each problem.

Error Messages

These messages indicate errors which you must correct before a print job
can continue or the printer status returned to "Ready".
Ready
indicator
(green)
Blinking
Rapid blinking alter-
nately
48
Error Condition
indicator
(orange)
Blinking Communication Error.
Video Under-run
No media in the tray
specified in the printer
driver.
Media size error
If the "Auto Continue"
option has been acti-
vated in the Status Dis-
play, the sheet already
fed in, is automatically
ejected after a predeter-
mined time.
Waiting for the Manual
Duplex.
Waiting for a proof print
Action
Check the printer
cable.
Turn off the printer.
After a few seconds,
turn on the printer.
Change to a lower
resolution.
Load the appropriate
type of media into
Tray 1.
Load the appropriate
size media into Tray 1.
Load the second side
of the media. (Refer to
the "Manual Duplex-
ing" on page 31.)
Press the Cancel but-
ton if the proof print is
acceptable. If it is not
acceptable, hold down
the Cancel button for
more than 5 seconds
to cancel the current
job.
Indicator Messages