Makita GRH08 Instruction Manual page 18

3. Dispose of the dust, and then clean the filter.
Fig.42
NOTICE:
When cleaning the filter, tap the case
of the filter gently by hand to remove dust. Do not
tap the filter directly; touch the filter with brush
or similar; or blow compressed air on the filter.
Doing so may damage the filter.
Replacing filter of dust case
1. Remove the dust case while pressing down the
latch lever of the dust case.
Fig.43
► 1. Latch Lever
2.
Lift the lock tab slightly outwards and open the
filter cover of the dust case.
1
Fig.44
► 1. Filter cover 2. Lock tab
3.
Fig.45
► 1. Filter 2. Filter case
4.
attach the filter cover.
5.
the dust case to the dust collection system.
Replacing sealing cap
A damaged or worn-out sealing cap may affect the dust
collecting performance. Replace the sealing cap with
new one as appropriate, aligning its guide projection
with guide notch on the nozzle head.
1
Fig.46
► 1. Sealing cap 2. Guide projection 3. Nozzle head
2
18 ENGLISH
Remove the filter from the filter case.
Attach a new filter to the filter case, and then
Close the cover of the dust case, and then attach
1
4. Guide notch
1
2
3
4
2