Advertisement
Step 1 :
The Non-ferrous Top plate, over which
SRC Top Rack will be mounted, is as
shown in the drawing.
It has the 4 mounting hole provision, to
mount and fit the SRC top Rac.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 2:
Orient and Align the Top Rack (1) in-line with the 4
Mounting holes on the Non-ferrous Top plate and Slip-
in the Spacer (3) – 4 off, between the underside of the
Top Rack and the Top plate, as shown.
Also, slide-in the M6 Countersink Washer (2) – 4 off
and M6 x 45 Screw (4) – 4 off, in-line with the above
mounting holes.
Page 3
Advertisement
