Removing The Fan; Replacing The Fan - Dell Studio 1555 Service Manual

Back to Contents Page
Fan
Dell Studio™ 1555 Service Manual
Removing the Fan
Replacing the Fan
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on the back of the computer).
CAUTION:
is not covered by your warranty.
CAUTION:
inside the computer.
Removing the Fan
1. Follow the instructions in
2. Remove the optical drive (see
3. Disconnect the AC adapter connector cable, USB cable, fan cable, and the subwoofer cable from the system board.
4. Remove the six screws that secure the system board to the computer base.
5. Lift the system board off the computer base.
6. Remove the two screws that secure the fan to the computer base.
7. Lift the fan off the computer base.
1 screws (2) 2 fan cable
Replacing the Fan
1. Place the fan on the computer base and replace the two screws that secure the fan to the computer base.
2. Place the system board on computer base.
3. Replace the six screws that secure the system board to the computer base.
4. Connect the AC adapter connector cable, USB cable, fan cable, and the subwoofer cable to their respective connectors on the system board.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Optical
UserManuals.info
Before Working Inside Your
Drive).
Computer) before working