Table of Contents
Advertisement
Command number 152: Entry delay No. 2
Default values ------------------------------------------------------------------->
Positions -------------------------------------------------------------------------->
Digit positions (1) - (3): Entry delay No. 2
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 153: Entry delay No. 3
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Entry delay No. 3
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 154: Entry delay No. 4
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Entry delay No. 4
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 155: Exit delay Partition No. 1
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Exit delay Partition No. 1
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 156: Exit delay Partition No. 2
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Exit delay Partition No. 2
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 157: Exit delay Partition No. 3
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Exit delay Partition No. 3
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 158: Exit delay Partition No. 4
Default values -------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Exit delay Partition No. 4
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Command number 159: Siren time of Partition No. 1
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Partition Siren time
The code must have 3 digits. Valid values are de 000 a 255 minutes.
Command number 160: Siren time of Partition No. 2
Default values -------------------------------------------------------------------->
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Partition Siren time
The code must have 3 digits. Valid values are from 000 to 255 minutes.
Command number 161: Siren time of Partition No. 3
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Partition Siren time
The code must have 3 digits. Valid values are from 000 to 255 minutes.
22
0
3
1
5
2
(1)
(2)
(3)
3
1
5
3
(2)
(3)
3
1
5
4
(2)
(3)
6
1
5
5
(2)
(3)
6
1
5
6
(2)
(3)
6
1
5
7
(2)
(3)
6
1
5
8
(2)
(3)
0
1
5
9
(2)
(3)
0
0
1
6
0
(2)
(3)
0
1
6
1
(2)
(3)
Command number 162: Siren time of Partition No. 4
0
Default values ------------------------------------------------------------------->
Positions -------------------------------------------------------------------------->
Digit positions (1) - (3): Partition Siren time
The code must have 3 digits. Valid values are from 000 to 255 minutes.
Command number 163: Time interval for Cross zones
0
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Time interval for Cross zones
The code must have 3 digits. Valid values are from 000 to 255 seconds.
Note: If you set a time equal to 000, the Cross zones will not generate an alarm.
0
Command number 165: Network failure/restoral transmission delay
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Network failure/restoral transmission delay
The code must have 3 digits. Valid values are from 000 to 255 minutes.
Note: This delay has a +/- one minute tolerance
0
Command number 166: No activity arming time of Partition No. 1
Default values ------------------------------------------------------------------->
Positions ------------------------------------------------------------------------->
Digit positions (1) - (3): Partition No activity arming time
The code must have 3 digits. Valid values are from 000 to 255 hours.
0
Note: If you set 000, No activity arming time will be cancelled.
Command number 167: No activity arming time of Partition No. 2
Default values -------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Partition No activity arming time
0
The code must have 3 digits. Valid values are from 000 to 255 hours.
Note: If you set 000, No activity arming time will be cancelled.
Command number 168: No activity arming time of Partition No. 3
Default values ------------------------------------------------------------------->
Positions -------------------------------------------------------------------------->
0
Digit positions (1) - (3): Partition No activity arming time
The code must have 3 digits. Valid values are from 000 to 255 hours.
Note: If you set 000, No activity arming time will be cancelled.
Command number 169: No activity arming time of Partition No. 4
Default values ------------------------------------------------------------------->
5
Positions -------------------------------------------------------------------------->
Digit positions (1) - (3): Partition No activity arming time
The code must have 3 digits. Valid values are from 000 to 255 hours.
Note: If you set 000, No activity arming time will be cancelled.
Command number 170: Delay in retransmission of test and network failure report
in case of delivery failure
5
Default values --------------------------------------------------------------------> 0
Positions ---------------------------------------------------------------------------> (1)
Digit positions (1) - (3): Retransmission delay
The code must have 3 digits. Valid values are from 000 to 255 minutes.
Note: To cancel this command it must be programmed with digits 000
5
Command number 172: PGM pulse time
Default values ------------------------------------------------------------------->
Positions ------------------------------------------------------------------------->
The code must have 3 digits. Valid values are from 000 to 255 seconds.
0
0
1
6
2
(1)
(2)
3
1
6
3
(2)
0
1
6
5
(2)
0
0
1
6
6
(1)
(2)
0
1
6
7
(2)
0
0
1
6
8
(1)
(2)
0
0
1
6
9
(1)
(2)
3
1
7
0
(2)
(3)
0
0
1
7
2
(1)
(2)
(3)
5
(3)
0
(3)
0
(3)
0
(3)
0
(3)
0
(3)
0
(3)
0
5
Advertisement
Table of Contents
