Download Print this page

General Instructions; Mounting Location - Kenwood SIRIUS CX-SR10 Installation Manual

Kenwood sirius cx-sr10: install guide

Advertisement

Mechanical data:
Shape
Color
Dimensions
Weight
Cables
Connectors
Mounting
Cover
Electrical data:
Sirius
Peak Gain (SAT)
3 dB beam width (SAT)
4 dB beam width (SAT)
Noise figure (SAT)
Peak Gain (Ter.)
Noise figure (Ter.)

General Instructions

Satellite antennas are extremely sensitive and finely specified to facilitate reception
of satellite signals under a variety of conditions across the whole of North America.
It is important to read these instructions carefully to ensure that the antenna is
mounted properly in the best location in order to provide optimum reception quality.

Mounting location

The satellite antenna should be mounted horizontally on a metal surface measuring
at least 18 inches by 18 inches. The best reception quality is achieved at the high-
est point of the vehicle (i.e. the roof) but the trunk lid is an alternate location for
convertibles and for some sedans.
It is important that the antenna has a clear "view" to the satellites and ground-based
repeaters and should therefore be mounted in an unobstructed location (i.e. clear of
roof racks, sunroofs, other antennas). Use the table below as a guide for the
required distance between the antenna placement and a possible obstruction with a
given height.
Mount the antenna this far away
12"
18"
24"
30"
(Glass sunroofs, which open outwards and cover the rear roof area, should not
affect the location of the antenna module).
Installation temperature
Installation should be carried out when conditions are at room temperature or
above. Firstly, colder temperatures could affect the curing time of the antenna mod-
ule's adhesive. Secondly, when mounting the antenna module on a sedan, it will be
easier to work with the rubber molding around the window.
"Beveled teardrop"
Black
95mm x 70mm x 38mm (approx)
150 grams (5.25oz) (excl. cables)
4 meters (13 feet) micro low loss
2 x FAKRA / SMB (keyed per specifi-cation)
Acrylic foam adhesive pads
Impact resistant glass filled nylon (paintable)
Per specification Sirius RX000002-010300
6 dBic
130 degree
140 degree
0.7 dB
6 dBi
1.1 dB
From an obstruction this high
4
4"
6"
8"
10"

Advertisement

loading