Clarity Walker W-1000 User Manual page 7

Warning: To prevent
electrical shock, always
remove the telephone
line cord from the wall
jack before removing
the cord from the
telephone. Never leave
the line cord connected
to the wall jack if it is
not also connected to
the telephone.
Select a Location:
• The unit should be located near a wall
jack for easy installation.
• The unit should be located in an area
where it is easy to see the lighted ringer.
• The unit can be used as a desk top
phone or a wall mount phone.
Avoid placing the unit
where it will be exposed
to excessive heat or
humidity.
W-1000
W1000_User_Guide
Installation
Coiled
Cord
Here
7
Connecting the Clarity
Phone:
To install as a Desk Unit:
• Plug one end of the telephone line
cord (long, flat) into the back of the
Walker Clarity.
• Plug the other end of the telephone
line cord into the wall jack.
• Plug one end of the handset cord
(coiled) into the bottom of the handset.
• Plug the other end of the handset cord
into the jack located on the left edge of
the Walker Clarity.
• Place the handset in the cradle of the
Walker Clarity.
Flat
Cord
Here
RJ-11C
11/15/99, 9:37 PM
Note: If you are
plugging the phone into
an older 4-prong jack,
use an RJ11C adapter
Page 7
E
N
G
L
I
S
H