Changing The Navigation Settings; Adjusting The Traffic Settings; Viewing Information (About); Restoring The Settings - Kenwood DNX7120 Instruction Manual

Kenwood dnx7120: user guide
Hide thumbs Also See for DNX7120:
Table of Contents

Advertisement

Changing the Settings

Changing the Navigation Settings

From the Menu page, touch Settings >
Navigation.
• Vehicl
Vehicle—specify your vehicle type.
• Preference—select a preference for route calculations.
Preference
Faster Time
Shorter Distance
Off Road
• Ask Preference—select whether the navigation system
asks for your preference each time it calculates a route.
• Next Turn Pop-up—select when the Next Turn page
appears while navigating a route.
Preference
On
Auto
Off
32
DNX7120/DNX8120 GPS Navigation Instruction Manual
Description
Routes calculated with this setting are
faster to drive but may be longer in
distance.
Routes calculated with this setting are
shorter in distance but may take more
time to drive.
Creates a direct-line route from your
current location to your destination. This
may be useful when you are traveling
outside of detailed map coverage areas,
or where no roads exist.
Description
The Next Turn page is displayed for
every turn.
The Next Turn page is only displayed
when you are not in the Map page,
because you are already tracking your
turns.
The system does not switch to the Next
Turn page for each turn.
Next Turn Page
• Off-Route Recalculation—set the way the navigation
system responds when off the route. You can silence the
"off-route, recalculating" message here.
• Continuous Auto Routing—enable or disable the
Continuous Auto Routing feature. This feature allows
the navigation system to continually search for a better
route to your destination. Continuous Auto Routing may
be useful if a traffic accident occurs or there are time-
restricted turns on the current route. A
on the map when a better route than the one you are
currently taking is available. Touch the
better route.
• Avoidance Setup—see page 20.

Adjusting the Traffic Settings

See page 28.

Viewing Information (About)

From the Menu page, touch Settings >
About.
• Software—the software version, audio version, unit
ID, and registration code for the unit are listed. The SiRF
version being used in the GPS is also shown.
• Detail Maps—view information about the preloaded
detailed maps.
• FM Traffic Receiver —If you have an FM Traffic Receiver,
you can view the FM Traffic Receiver unit ID.
• XM—If you have an XM antenna connected to the unit,
you can view information about your XM subscription.
• Copyright Info—view the copyright information
relevant to the unit configuration.

Restoring the Settings

To restore the navigation system to its original
settings, open the Menu page and touch Settings
> Restore Defaults > Yes.
is displayed
to take the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx8120

Table of Contents