Clarity Cordless Telephone User Manual page 28

Adding a Memory Location
1. Unit must be in standby mode only.
2. Press the MEM button.
3. Enter the telephone number you wish to store.
4. Press the MEM button.
5. Press the number on the dial pad that you
wish to store the number to.
6. A long beep will indicate the programming
process is complete.
During the memory storage process the TALK
button will flash GREEN.
Use the RD/P button while entering the telephone
number to insert a pause. Refer to the Pause Feature
section on page 21.
Dialing a Memory Location
1. Press the TALK button.
2. Press the MEM button.
3. Press the number on the dial pad where the
desired number has been stored.
4. The call will automatically dial.
Adding an EMERGENCY Number
1. Unit must be in standby mode only.
2. Press the MEM button.
28