Connecting Wires To Terminals - Kenwood KDC-515S Instruction Manual

Connecting Wires to Terminals

2WARNING
If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
2CAUTION
When only two speakers are being connected to the
system, connect the connectors either to both the
front output terminals or to both the rear output
terminals (do not mix front and rear). For example, if
you connect the + connector of the left speaker to a
front output terminal, do not connect the - connector
to a rear output terminal.
To connect the Disc changer or
DAB unit, consult each manual.
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier, connect
to its power control terminal.
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
To car light control switch
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
Car fuse
box
(Main fuse)
Battery
KENWOOD disc changer
/ DAB control input /
Display Data Output Jack
NOTE
Power control wire (Blue/White)
P.CONT
ANT. Motor antenna control wire (Blue)
CONT.
Dimmer control wire (Orange / White)
ILLUMI
EXT.CONT. External amplifier control wire
(Pink / Black) (KDC-X615 only)
Ignition key
switch
–
+
Rear left output (White)
/Non-fading left output
(KDC-X615 only)
Rear right output (Red)
/Non-fading right output
(KDC-X615 only)
Front right output (Red)
Front left output (White)
Outputs data representing the
unit's current state, causing it
to appear in the external
display.To connect to this jack,
a converting adapter (optional)
is necessary. (KDC-X615/6015
only)
ACC
Ignition wire (Red)
Car fuse box
Battery wire (Yellow)
Fuse (10A)
Ground wire (Black) - (To car chassis)
— 36 —
FM/AM antenna input
Wiring harness
(Accessory1)
White/Black
To front left
speaker
+
FRONT • L
White
Gray/Black
To front right
speaker
+
FRONT • R
Gray
Green/Black
To rear left
speaker
REAR • L +
Green
Purple/Black
To rear right
REAR • R + speaker
Purple