Unpacking Your Loudspeaker 700 loudspeakers come in different shapes and sizes. If you are unpacking a floor stander, please remember that these units are heavy. We suggest that you have someone to assist you. Lift the loudspeaker carefully out of the packing. DO NOT try and lift the loudspeaker using the protective bag.
Equipment for attention under warranty should be considered return carriage paid. If equipment is found to comply with the published specification, Mission reserves the right to raise a charge. The above conditions do not affect your statutory rights as a consumer.
Page 4
Revisited as a sister model to the eagerly anticipated reintroduction of the Mission 770 - a model which heralded the return to UK manufacturing for the Mission brand; the Mission 700 takes what was referred to as an ‘industry benchmark, in the original 700 model, but utilises Mission's 40 years of evolution and development in loudspeaker design.
Positioning The Loudspeakers Place the loudspeakers on rigid stands. We strongly recommend the Mission 700 stands which have been purposely designed to achieve the best performance from your speakers. If you are sitting within 2 metres of the speakers, the distance between the speakers should be similar to the distance between you and the speakers.
Setting Up a Home Theatre System Front and E ects Channels: The front loudspeakers are placed on either side of the television screen, 2 to 3 metres apart. The speakers should be angled slightly so they are aimed towards listeners. We recommend placing the rear e ects speakers in a high position, behind the listener’s head.
finish. Your Mission loudspeakers use a specially hardwearing sealed finish. They should not be waxed or treated with spray polishes which will smear and dim their lustrous finish. Polish them with a dry or barely moist cloth to remove dust and finger marks, etc.
We hope you will derive many years of good service from our products. Mission warrants its products, subject to the following terms and conditions below, to be free from defects in materials and workmanship.
Mission or the authorised distributor, dealer or service centre may make a charge for the supply of new packaging for the return of the repaired item. Please note, insurance is recommended as goods are returned at the owner’s risk.
Page 10
Repairs handled or processed without authorisation or approval of the appointed representative will be excluded from this limited warranty. Please note, Mission is not able to supply parts or replacement items to any other entity than the o cial distributor or authorised service centre.
Width 260mm Depth (with terminals) (270+22)mm Carton Size 680 x 410 x 630mm Net Weight 12.8kg/pcs Mission 700 Stand Columns High carbon steel with internal damping Top Plate High carbon steel Base Frame Interlocked high carbon steel tube Base Spikes...
Page 12
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
Need help?
Do you have a question about the 700 and is the answer not in the manual?
Questions and answers