KENT SelectSpot Operator's Manual
Kent euroclean selectspot: user guide
Hide thumbs
Also See for SelectSpot:
- Brochure (20 pages) ,
- Specifications (2 pages) ,
- Specifications (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for KENT SelectSpot
Summary of Contents for KENT SelectSpot
- Page 1 ™ SelectSpot OPERATOR MANUAL Kent MODEL 56220100 10/98 revised 3/02 Form Number 56041434...
-
Page 2: Table Of Contents
Spotting Procedures Prior to Operating the Machine ...8 Operating the Machine ...8 After Use ...9 Maintenance Schedule ... 9 Flushing Pump System ... 9 Vacuum Motor Maintenance ...9 Troubleshooting ... 10 Technical Specifications ... 10 1 - FORM NO. 56041434 - SelectSpot ™ revised 2/01 Page... -
Page 3: Introduction
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ This manual will help you get the most from your SelectSpot™. Read it thoroughly before operating the machine. Note: Bold numbers in parentheses indicate an item illustrated on page 7. This product is intended for commercial use only. _________________________________________________________________________________________________________________... -
Page 4: Cautions And Warnings
Use extra care when cleaning on stairs. Do not use to pick up flammable or combustible liquids such as petrol or use in areas where they may be present. 3 - FORM NO. 56041434 - SelectSpot SAVE THESE INSTRUCTIONS ™... -
Page 5: Importantes Mesures De Sécurité
User de prudence lors du nettoyage des escaliers. Ne pas aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans des endroits ou peuvent se trouver de tels liquides. CONSERVER CES INSTRUCTIONS revised 2/01 FORM NO. 56041434 - SelectSpot ™... -
Page 6: Grounding Instructions
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and outlets. DO NOT use extension cords more than 50 feet (15 m) long. PLEASE NOTE: FOR NORTH AMERICA ONLY 5 - FORM NO. 56041434 - SelectSpot ™ revised 2/01... -
Page 7: Instructions Visant La Mise À La Terre
Les ralonges connectées à cette machine doivent avoir 12 mesures, trois ganses de fil ayant trois fiches masculines féminines tree-prong plugs and outlets. N´UTILISEZ PAS de ralonge de plus de 15 m (50 pieds) de long. VEUILLEZ NOTER: CES INSTRUCTIONS CONCERNENT UNIQUEMENT L’AMÉRIQUE DU NORD revised 2/01 FORM NO. 56041434 - SelectSpot ™... -
Page 8: Know Your Machine
Optional Cart Hose Assembly Hand Tool Vacuum Motor Exhaust Filter Vacuum Motor Intake Filter Recovery Tank Full Indicator Solution Strainer Pigtail Cord Power Cord Solution Hose Coupler Power Switch Vacuum Gasket 7 - FORM NO. 56041434 - SelectSpot ™ revised 2/01... -
Page 9: Preparing For Use And Operating The Machine
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OPERATING THE MACHINE Toggle the Power Switch (15) to the UP position to turn both the vacuum motor and the solution pump ON. With the Power Switch (15) in the DOWN position, only the vacuum motor runs. Place the Hand Tool (7) on the stain and squeeze the trigger while pulling back on the tool. -
Page 10: After Use
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ VACUUM MOTOR MAINTENANCE Once a month, check the vacuum motor to make sure the airways are not blocked. Clear hose of debris and keep the vacuum motor exhaust area clean. Have Kent check the carbon motor brushes once a year or after 500 operating hours. Replace the carbon brushes if they are worn to 3/8” (9.5 mm) or less. -
Page 11: Troubleshooting
2/01 TROUBLESHOOTING Remedy Push hose cuff onto fitting. Remove and clean filter Check Latches (2) and re-latch. Replace gasket Replace or tighten Lid Remove and clean strainer SelectSpot™ 56220100 120/60 <73 FORM NO. 56041434 - SelectSpot ™ - 10... - Page 12 © 2002 Printed in USA 14600 21st Avenue North 1151 Bryn Mawr Avenue Plymouth, MN, 55447-3408 Itasca, Illinois 60143 www.eurocleanusa.com www.eurocleanusa.com Phone: 800-334-1083 Phone: 800-545-4372 Fax: 866-261-4779 Fax: 888-323-3822...
Need help?
Do you have a question about the SelectSpot and is the answer not in the manual?
Questions and answers