ProtoArc EK01 Frequently Asked Questions

EK01
Frequently Asked Questions
01

How to switch between different devices?

Short press the keyboard connection button to easily switch to multiple
mode devices
02

How to use a USB receiver for EK01 and EM01

1.Connect the EK01 keyboard to EM01 mouse USB receiver
(please make sure that you are currently on USB mode):
-Insert the USB receiver of EM01 mouse and turn on the mouse
-Turn on the keyboard, press Esc and + button for 3 seconds to enter
pairing mode, if you see the USB mode indicate light is flashing, then you
have entered the pairing mode;
-Once you have entered the pairing mode, quickly unplug and plug in the
USB receiver for mouse;
-And there we paired two ProtoArc products with one USB receiver.
2.Connect the EM01 mouse to EK01 keyboard USB receiver
(please make sure that you are currently on USB mode):
-Insert the USB receiver of EK01 keyboard and turn on the keyboard;
-Turn on the mouse, press right, left and middle button of the mouse for
3 seconds to enter pairing mode, if you see the USB mode indicate light
is flashing, then you have entered the pairing mode;
-Once you have entered the pairing mode, quickly unplug and plug in the
USB receiver for keyboard;
-And there we paired two ProtoArc products with one USB receiver.
03

Is there a way to keep the 'BACKLIGHT' always on?

04
The backlight can not be keep on, this way is necessary to protect the
Can I Use This Mouse With A Mac That Does Not Have A Usb Port?
keyboard battery.
You can connect this mouse with your Mac by Bluetooth connection way.
About the keyboard backlight, the backlight will go out for 30s without
operation, press any key to wake up.
If the keyboard and backlight have no operation for 30 minutes, the
keyboard will go into deep sleep, you can press any key to wake it up,
while the backlight needs to be turned on again.
04
04
Can I use this mouse with a Mac that DOES NOT have a USB port? What is the 'LOCK' button
The "Lock" button
for?
is to lock computer screen.