Parts & Features - Black & Decker BD05MWT6 Instruction Manual

ENGLISH
SET UP & USE
PARTS & FEATURES
Control Panel
TEMPERATURE
COOLING
1. POWER: Turn on the unit by rotating the MODE dial to the desired COOLING
or FAN setting. Turn the dial to OFF at any time to shut OFF the unit.
2. COOLING MODE: For maximum cooling set the MODE dial to HI COOL. The fan
will automatically go to high and circulate the cool air throughout the room.
The fan will operate on low in LO COOL mode.
3. THERMOSTAT: Turn the TEMP dial to set the desired temperature setting 1-7.
For maximum cooling turn the TEMP dial to 7(max cool).
4. FAN MODE: For fan only modes, choose either HI FAN or LO FAN. The
thermostat will not operate when in fan mode.
NOTE: To minimize wear and tear on the air conditioner, always wait at least 3
minutes before changing modes. This will help prevent the compressor
from overheating and the circuit breaker from tripping.
Page 14
Mode Dial
Horizontal Louvers
Filter