Advertisement
6. Insert each wire into the appropriate hole and
snap down the locking tabs.
7. Insert the smooth side of the connector plug into
the smooth side of the V-T8 socket.
8. Connect the amplifier to the connector terminal
labeled: INPUT FROM AMP.
9. Connect the speaker wires to the connector
terminals labeled: OUTPUTS TO VOLUME
CONTROLS.
See installation diagram.
6
SPECIFICATIONS
Mounting:
In a structured wiring cabinet using Christmas tree
snap-in plugs (included)
Wall or flat surface:
Use drywall screws
Wiring requirements:
2 individual runs of 2-conductor 14-18-gauge
speaker wire or 1 run of 4-conductor
Unit dimensions:
6-7/8" wide x 3" high x 1-1/4" deep
Warranty: 10 year limited
Advertisement
