9. Connect the terminated Keypad wire to the M-4KP
terminal labeled SYSTEM.
10. Install the M-4KP into the device ring.
11. Attach a cover plate
INSTALLATION: M-10KP
1. Identify the Keypad wire. Label the wire for future
reference.
2. Terminate the CAT5 wire with a RJ-45 connector.
See Figure 2.
3. Connect the terminated Keypad wire to the M-4KP
Keypad terminal labeled SYSTEM.
4. Locate the supplied CAT5 cable included in the
M-10KP package.
5. Connect one end of the cable to the M-4KP
terminal labeled ACCESSORY KEYPAD.
6. Connect the other end of the cable to the M-10KP
terminal labeled OUTPUT
7. Install the M-4 KP and M-10KP into the device ring.
8. Attach a cover plate
INSTALLATION DIAGRAM
Required
Category
M-4KP
5 Wire
M-64 Multizone Receiver
1
2
3
4
5
6
7
8
9
Speakers
--
+
0
RANDOM
GROUP
DISC
FAV
M-10KP
5