Two channel amplifier for powering distributed audio systems (2 pages)
Summary of Contents for Jobsite AB50-X2
Page 1
DATA SHEET For Powering Television Sound through Distributed Audio Speakers AB50-X2 TWO CHANNEL POWER AMPLIFIER WITH AUTOMATIC SPEAKER SWITCHING...
Page 2
AB50-X2 TWO CHANNEL POWER AMPLIFIER WITH AUTOMATIC SPEAKER SWITCHING FEATURES • Compact stereo amplifier with 50 watts per channel • Automatically switches between either one or two pairs of loudspeakers • Stable into low impedance loads (4 ohms) • CE, CSA E65 UL6500 approved INSTALLATION FRIENDLY DESIGN: •...
Page 3
10. Connect the Multi-Zone Receiver wires to the terminal labeled SPEAKER A 11. Connect the Speaker wires to the terminal labeled SPEAKER A OUT. 12. Plug the AB50-X2 power cord into the un-switched AC outlet and adjust the current sensing, using the sensitivity adjustment screw located on the bottom of the unit.