Table of Contents
Advertisement
Regenerate the softening
system
In order to maintain trouble-free
operation of the softening system,
the device regularly performs a
regeneration of the softening system.
The softening system is regenerated
in all programs before the end of the
main wash cycle. This increases the
running time and the consumption
values of, for example, water and
electricity.
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum additional runtime and
consumption values when regenerating the
softening system.
Regenerating the softening
system after x washings
Additional running time in minutes
Additional water consumption in liters
Additional electricity consumption in kWh
The stated consumption values are
laboratory measured values, which
are determined according to the
currently valid standard and based on
the Eco 50° program and the factory-
set water hardness value of 13 - 16
°dH.
G
lance flushing system
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
Filling rinse aid
If the rinse aid refill indicator lights
up, add rinse aid. Only use rinse aid
for domestic dishwashers.
Press and lift the tab on the lid of
1.
the rinse aid container .
Top up the rinse aid up to the max
2.
mark.
6
7
5
0.05
If rinse aid has spilled over, it must
3.
be removed from the rinse aid
container.
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
Close the lid of the rinse aid
4.
reservoir.
a The lid audibly clicks into place.
Rinse System NL
2
1
max
25
Advertisement
Table of Contents
