HAIRCUT PROFESSIONAL TH56 User Manual page 21

USE
C
HARGING THE BATTERY
It is essential to charge the battery for about 2 hours before using the
trimmer for the first time. Charge the trimmer at least once during the year
following the date of delivery. The battery reaches its full capacity after 3
or 4 charging cycles.
 The equipment must only be used with the
power pack it was supplied with.
 WARNING: To recharge the battery, use
only the removable power pack supplied
with the equipment.
When charging, it is advisable to switch the trimmer off (On/Off button set
to 0, Fig. 1-B).
C
HARGING THE TRIMMER FROM THE MAINS SUPPLY
▪ Insert the electrical lead into the socket of the trimmer (Fig. 2a).
▪ Connect the power pack (Fig. 1-I) to a mains power socket.
▪ During charging, the On/Off button flashes (Fig. 1-B).
▪ At the end of charging, the indicator light comes on steadily. Unplug the power
pack. The trimmer can now be used without the electrical lead.
C
HARGING THE TRIMMER ON THE CHARGE STAND
▪ Insert the electrical lead into the charge stand socket (Fig. 2b).
▪ Insert the power pack in a mains power socket.
▪ Put the trimmer on the charge stand (Fig. 1-H).
▪ At the end of charging, the indicator light comes on steadily. The trimmer can
now be used without the electrical lead.
Use only with the
HP12D-0501500-AE power
pack
21