Download Print this page
GE 45138 User Manual
GE 45138 User Manual

GE 45138 User Manual

Wireless alarm system signal repeater
Hide thumbs Also See for 45138:

Advertisement

Wireless Alarm System
Signal Repeater
User's Manual
Choice
Choice
ALERT
ALERT
Control all Sensors
& accessories from
one location
45138

Advertisement

loading

Summary of Contents for GE 45138

  • Page 1 Wireless Alarm System Signal Repeater User’s Manual Choice Choice ALERT ALERT ™ ™ Control all Sensors & accessories from one location 45138...
  • Page 2: Table Of Contents

    Important Safeguards Introduction Installation Adding a Signal Repeater to the system Testing the Signal Repeater or your system Low battery indicator Battery warnings FCC Warning Table of Contents...
  • Page 3 Before connecting or operating the SIgnal Repeater, please read these instructions carefully and save this manual for future reference. Congratulations The GE Choice Alert Wireless Alarm System is one ™ of the most affordable and expandable wireless alarm systems available. You’ll discover the system offers many features typically found in custom installed Alarm systems.
  • Page 4: Important Safeguards

    Important safeguards PreCautions 1. Do not attempt to disassemble the Signal Repeater, unless described in the user’s manual. There are no user serviceable parts. . Handle with Care – Avoid striking or shaking. Improper use or storage could damage the Signal Repeater.
  • Page 5: Introduction

    Introduction The Signal Repeater will extend the range of the Choice Alert system up to 150 feet from its location – Effectively repeating the signal from any Sensor back to the Control Center should a Sensor be located out of range. The Signal Repeater does not send or receive signals to the Silent Alert or Alarm Siren, or from other Signal Repeaters.
  • Page 6: Installation

    Adding a Signal Repeater Step 1 - Find an electric outlet near the Sensor having trouble communicating with the Control Center. Make certain the location is between the Sensor and Control Center. Plug the Signal Repeater into the outlet and press the ‘Test’ Test button on the side of Signal Repeater.
  • Page 7: Low Battery Indicator

    Step 3 - When the Signal Repeater receives the confirmation signal, the LED indicator will flash, five times. If the Signal Repeater does not receive the confirmation signal from the Control Center, the LED indicator on the Signal Repeater will not flash.
  • Page 8: Fcc Warning

    Any unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal laws. The Choice Alert system complies with part 15 of the FCC rules. Operation is subject to the following conditions: 1) The Choice Alert system may not cause harmful interference.
  • Page 9 The product, if used properly, may reduce the risk of burglary, robbery, or other adverse events. However, JASCO is not an insurer, this product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves with proper insurance.
  • Page 12 General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 1 year limited warranty. Visit 45138-1 www.jascoproducts.com for details. 01/09/08...

This manual is also suitable for:

Choice alert 45138