Playing At Random - Random Play; Repeating Tracks Or Cds - Repeat Play; Prohibiting Disc Ejection - Tray Lock - JVC MX-K5 Instructions Manual

5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
6
Press CD 6.
The tracks are played in the order you
have programed.
To stop during play, press 7.
To exit from Program play mode, press PROGRAM again
before or after play so that the unit enters Continuous play
mode. (The program you have made is stored in memory
until you turn off the unit or erase the program.)
To modify the program
Before playing, you can erase the programed
tracks shown on the display by pressing CANCEL.
• Each time you press the button, the last
programmed track is erased from the program.
To check the program during play, press ¢ (or 4) so that the
playing track will change according to the program (or reverse)
order.
To add tracks in the program before play, simply select the disc
numbers and/or track numbers you want to add by following steps
3 and 4 of the programming procedure on page 13.
To erase the entire program before or during play, press 7 twice.
• Ejecting a carrousel will also erase the stored memory.
If you try to program a 33rd track
"FULL" will appear on the display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD. Such entries are ignored.
Playing at Random — Random Play
The tracks of the selected CD will play at random.
1
Load a CD.
• If the current playing source is not the CD
player, press CD 6, then 7 before going
to the next step.
2
Press RANDOM so that "RANDOM"
appears on the display.
The RANDOM indicator also lights up on the display.
• The tracks are played automatically at random. Random
play ends when all tracks are played once.
To stop during play, press 7.
• Random play also stops when 0 is pressed.
To exit from Random play mode, press RANDOM again
during play so that the unit enters Continuous play mode.
To use Random play mode, you have to exit from the
Program play mode.
If you press 4 or ¢
Skips to the next track selected randomly.
Repeating Tracks or CDs — Repeat Play
You can have all the CDs, the program or the individual track
currently playing repeat as many times as you like.
To repeat play, press REPEAT during or before
CANCEL
/DEMO
playing.
• Each time you press the button, Repeat play
mode changes as follows, and the following
indicator lights up on the display:
REPEAT ALL DISC
REPEAT 1:
REPEAT 1 DISC*:
REPEAT ALL DISC: Repeats all the tracks on all the CDs.
* REPEAT 1 DISC is not used for Program play.
To cancel Repeat play, press REPEAT repeatedly until the
REPEAT indicator (REPEAT 1, REPEAT 1 DISC or
REPEAT ALL DISC) goes off from the display.
• Repeat play and Random play cannot be used at the same
time.
Prohibiting Disc Ejection — Tray Lock
You can prohibit CD ejection from the unit and lock CDs.
• This operation is possible only while the unit is on with CD
selected as the source.
On the unit ONLY:
M RANDOM
To prohibit disc ejection, press 0 for the carrousel while
holding 7.
"LOCKED" appears for a while, and the carrousel is locked.
To cancel the prohibition and unlock the CDs, press 0 for
the carrousel while holding 7.
"UNLOCKED" appears for a while, and the carrousel is
unlocked.
If you try to eject CDs
"LOCKED" appears to inform you that the Tray Lock is in use.
– 14 –
ALL DISC 1 DISC
REPEAT 1 DISC
Repeats one track on one CD.
Repeats all the tracks on one CD.
REPEAT PROGRAM
REPEAT 1