Troubleshooting - JVC GV-CB1EG Instructions Manual

36
EN
NOTE : External noise or disturbance may interfere with the microprocessors built into the
GV-CB1 JLIP Video Capture Box. If this happens, turn the power off and then turn it
on again.
Problem
No effect when clicking the
Input Select/Memory
buttons.
The video unit does not
operate when "Window" —
"VCR" in the menu bar and
"VCR" in the "VCR" opera-
tion window are clicked.
Reverse Slow Play and
Forward Slow Play not
available in "VCR" operation
window.
The"VCR" operation
window display shows a
different operation from
what the video unit is
actually doing.
On-screen display of video
unit is stored in memory.
Counter display appears in
the image display box even
when there is no tape in the
video unit.
Cause
The windows do not change during
transfer or compression of index image/full
image data.
The counter display in the "VCR" operation
window turns blue.
Is your video unit compatible with JLIP ?
Only JLIP-compatible units can be
operated.
If you are using a JLIP-compatible unit and
it still won't work, check to make sure that
it is correctly connected.
Is the video unit selected in "Select Unit" ?
Select correctly.
Initialize JLIP.
Make sure the video unit is turned on.
These are available only when the video
unit has a Slow Play function.
Slow Play in the VCR operation window
automatically switches to Play after
approximately 20 seconds.
In some cases, the video unit may continue
slow-motion playback even when the
"VCR" operation window changes from
Slow Play to Play. Check your video unit's
instruction manual for details.
If your video unit has an onscreen display,
turn it off.
When capture video data from a powered-
on video unit with no tape loaded, a
counter display may appear in the image
display box. Images corresponding to the
displayed counter number can no longer
be caputred.

TROUBLESHOOTING

Page
—
23
11 – 13
18
17
—
23
—
—