Connection To An Audio System - JVC DR-M70SEK Instructions Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
1
Method
Stereo system
AUDIO
Audio cable
(supplied)
This unit
AUDIO OUT
Connections

Connection to an Audio System

Analog audio
input jacks
VIDEO OUT
L
R
AUDIO OUT
• The playback soundtrack selection is done in DISC
Note
• By connecting this unit to a Multi-channel Dolby Digital decoder,
• The audio source on a disc in a Dolby Digital 5.1 channel sur-
• By connecting this unit to the DTS decoder, you can enjoy 5.1
• Playing back a DVD using incorrect settings may generate noise
2
Method
Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
menu available thru [TOP MENU] or [MENU/LIST]
buttons. DIGITAL OUT settings must be done correctly
to allow selected soundtrack to be played correctly.
Setting
Connection
If output is Dolby Digital encoded
audio, connect to a Dolby Digital
decoder.
If output is DTS encoded audio, con-
nect to the DTS decoder.
If output is encoded audio for both
Dolby Digital and DTS, connect to
the decoder which encodes multiple
audio sources.
Connecting to an MD deck or DAT
deck.
If not connected to any external
devices.
* To complete these settings, refer to pages
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theaters.
round format cannot be recorded as digital sound by an MD or
DAT deck.
channel Surround System which reproduces the original sound
as truthfully as possible. 5.1 channel Surround System is devel-
oped by the Digital Theater System Inc.
distortion and may also damage the speakers.
Digital audio
COAXIAL
input jack
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
SET UP>Advanced Setting Menu
>Playback >Digital Out >
PCM Dolby Digital
- Stream
- PCM
- Stream
- PCM
- PCM
75-77.
DTS
OFF
ON
ON
OFF
OFF
15
EN