Download Print this page

Other Play Methods; Random Play; Program Play; Sound Effect - JVC XL-PM30SL Instructions Manual

Jvc xl-pm30sl: instruction manual
Hide thumbs

Advertisement

Other Play Methods

Descriptions are common to Audio CDs and MP3/WMA files unless otherwise noted.

Random play

You can play all tracks in a random order. After playing all
tracks, the unit stops. Though the display for the Audio-CD and
MP3/WMA differs a little, operation is the same.
1
Play the disc.
2
Press MODE until "RAND" flashes.
MODE
Cancelling
Press MODE until "RAND" goes out, or press 7 to stop the disc.
For your reference:
• You can also select random play in stop mode.
• During program play ("PROG" appears on the display). ran-
dom play is not selectable.

Repeat play

You can repeatedly play one track or one group (for MP3/WMA),
or all tracks.
1
During playback or in stop mode, press MODE
until the repeat indicator lights up.
1 track repeat
1 group repeat (MP3/WMA only)
MODE
2
Cancelling
Press MODE until the repeat indicator goes out and the unit re-
turns to normal play mode.
For your reference:
Repeat function is also effective for program play (except 1 group
repeat).

Intro play

You can successively play the first 10 seconds of every track
from the first track.
Intro play stops after playing the last track.
1
In stop mode, press MODE until "INTRO" flashes.
MODE
2
Press 3/8.
Intro play will start from the first track.
Cancelling
Press MODE until "INTRO" goes out and the unit returns to nor-
mal play mode.
For your reference:
• You can also use intro play during playback. In this case, intro
play after the current track has been played back.
• You can also use intro play for program play.
7

Program play

You can program up to 64 tracks in any desired order including
the same tracks.
For Audio CD, go to step
operation is the same.
1
(MP3/WMA only) During playback or in stop mode,
press PROGRAM.
2
(MP3/WMA only) Select the desired group num-
ber. (e.g. 02)
3
Press PROGRAM.
4
Select the desired track. (e.g. 03)
All tracks repeat
5
Press PROGRAM
6
For MP3/WMA, repeat steps 2-5 to select
other tracks.
For Audio-CD, repeat steps 4 and 5.
7
Press 3/8.
• To confirm the programmed tracks
In stop mode, press PROGRAM repeatedly. The programmed
track number will successively appear together with the pro-
gram sequence number. At this time, you can change the pro-
gram, if required.
If the programmed tracks are less than 64, track number "
appears for the youngest programmable sequence number, enabling
further programming.
• To delete the entire programmed sequence
Set RESUME to "OFF", then in stop mode, press 7. Turning off
the unit deletes the program.
3
. Though the display differs a little,
"PROG" lights up
Program sequence number
Group number
Track number
"
RESUME
This function allows you to listen from the beginning of the track
that was lastly stopped.
RESUME
OFF
ON
To enable this function, set RESUME to "ON".
Press 6 to resume playback.
• The setting (e.g. sound effect, etc.) are also resumed.
To cancel this function, set RESUME to "OFF".

Sound effect

You can enjoy various sound effects.
Press SOUND
SOUND
Each time you press the button, the sound effect changes as follows:
ROCK
POP
FLAT
CLASSIC
Hyper-Bass Sound effect
You can enjoy powerful bass sound.
To get the hyper-bass sound effect
Keep depressing SOUND. "HBS" will be displayed.
SOUND
(for 1 second)
To cancel the HBS effect
Keep depressing SOUND again. The display "HBS" will go out.
JAZZ
( ID3 tag )

Advertisement

loading

  Related Manuals for JVC XL-PM30SL

This manual is also suitable for:

Xl-pm30sludXl-pm30sleuXl-pm30sluc