Apria Healthcare React Health Luna G3 Quick Start Manual

Get Started
Reference your
or go to
Place the device on a firm
1
flat surface.
See User Guide page 4
Connect the Power
2
Cord: Insert the plug
of the power adapter
into the DC inlet on
the back of the device.
Connect the power
cord to the power
adapter. Plug the other
end of the power cord
into the power outlet.
NOTE: If you have a BPAP device see User Guide
page 4 to connect the Power Cord Locker.
Connect the end of the tubing
3
to the air outlet of the device.
If using heated tubing,
connect the heated tubing
joint to the air outlet of the
device, and then insert the
power plug into the heated
tubing port on the back of
the device.
Connect the other end of
the tubing to the mask
according to the user
manual for the mask.
See User Guide page 5
Your Apria Sleep Therapy
Quick Start Guide
React Health Luna
Formerly known as 3B Medical, Inc.
Apria Sleep Therapy User Guide
Apria.com/Sleep for more details.
Power Adapter
Power Cord
Air
Outlet
Tubing
Air
Outlet
Heated
Tubing Joint
Power Plug
Heated
Tubing
let us
help!
Press down the water chamber, and then remove
4
it. Open the water chamber cap and fill the water
chamber with approximately 360 ml of water.
See User Guide page 5
DC
Inlet
Close the cap after the water is filled and return it to
5
the device.
See User Guide page 6
Insert the SD card into the SD
6
card slot.
See User Guide page 6
Heated
Tubing
Connect the device to a power outlet, press the
7
Start/Stop button
delivering air.
See User Guide page 6
G3
®
SD Card Slot
SD Card
and the device will start