Table of Contents
Advertisement
3.2 Client Application
1) The Client application has to be installed separately on each computer on which a
Series 200 Accessory Control application is desired. Turbochrom / TotalChrom
has to be available on each of these client computers.
2) To install the Series 200 Accessory Control software log on as a Windows
administrator.
3) Run the Setup.EXE on the installation disk.
4) Follow the instructions on the Welcome screen.
5) On the Installation Type screen select to install the Client Application only.
6) On the Server Name screen the Server name is entered by default.
Note: If no entry or an incorrect server name entry is present, enter the name of
the server on which the Server Application has been installed (see Server
Application Installation, step 1).
7) Complete the Client Installation by continuing with step 7 of the Server Application
Installation.
4. Required Turbochrom / TotalChrom System Configuration
Changes
In order to have access to the Series 200 Accessory Control software from the
Turbochrom / TotalChrom Navigator's Apps menu the following changes in the System
Configuration are required.
For every "Job Type" using PerkinElmer Series 200 Accessory Control software the
following procedures have to be completed under Turbochrom's / TotalChrom's
SysConfig.
4.1 For administrator accounts:
1) Open SysConfig and select the Job Types tab.
2) Select Job Type to be changed. For TC administrators, this is typically manager.
3) Select the 'Navigator Apps. Menu' button.
4) Select the 'New Document' icon and enter the following menu text: Series 200
Accessory Control Hands-On.
5) Next, using the 'Folder' icon, select Hands-On.exe from the directory C:\Program
Files\PerkinElmer\Series 200 Accessory Control (or wherever installed via step 7
in section 3.1, above).
6) On the 'Job Types' tab select the 'User Program Access' button.
7) Verify that this job type has access to all user programs (1
Page 5 of 6
st
option).
Advertisement
Table of Contents
