Agilent Technologies 1100 Series User Manual page 26

A
Upgrading an HP 1100 Series LC
18 Agilent 1100 Series LC Devices Connecting the Hardware and Triggering Data Acquisition
Table 5. Parts required to upgrade an Xcalibur-controlled HP 1100 Series LC
Part Number
00825-01140
00012-70008
00825-01-00024
2. Follow the instructions in
to install the JetDirect 400N PCB.
Note After the communication interface in the HP 1100 LC system is upgraded to
an Ethernet interface, the system is the same as, and will be referred to as, an Agilent
1100 LC system.
Description of Part
HP JetDirect 400N PCB
Ethernet 10 Base-T cable (2)
Ethernet switch
"Installing a Network Card in an Agilent Module" on page 4
Thermo Scientific