Advertisement
Always remember to switch off the appliance by opening the fuse holder before any
maintenance operations.
•
Toughened glass:
The electrical part of the toughened glass
plates is accessible by dismantling the riveted
lid under the plate.
•
Halogen lighting:
Halogen connections are located above
the halogen support. To access, remove the 2
mounting screws linking it to the beam.
•
Electric cabling:
Electric cabling is fixed behind the built-in control panel. To access this, remove the 4 screws
holding the panel.
The installer should check electric connections when commissioning the unit then once a year.
Any maintenance operation should be done by an electrician.
Vauconsant SA, all rights reserved A622xx & E633xx -rev0-ENG, 2/12/2010
Maintenance
Toughened glass
Top
Cover
Beam
USER MANUAL
Halogen support
Reflector
- 8 -
Advertisement
