Carrier TruVu ET Display7 Installation And Startup Manual
  1. Manuals
  2. Brands
  3. Carrier Manuals
  4. Monitor
  5. TruVu ET Display7
  6. Installation and startup manual

Carrier TruVu ET Display7 Installation And Startup Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TruVu™ ET Display (part# EQT3)
Installation and Start-up Guide
©2022 Carrier. All rights reserved. • Catalog No. 11-808-687-01 • 7/5/2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TruVu ET Display7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Carrier TruVu ET Display7

Summary of Contents for Carrier TruVu ET Display7

  • Page 1 TruVu™ ET Display (part# EQT3) Installation and Start-up Guide ©2022 Carrier. All rights reserved. • Catalog No. 11-808-687-01 • 7/5/2022...
  • Page 2 Verify that you have the most current version of this document from www.hvacpartners.com, the Carrier Partner Community website, or your local Carrier office. Important changes are listed in Document revision history at the end of this document. ©2022 Carrier. All rights reserved.

  • Page 3: Table Of Contents

    Contents What is the TruVu™ ET display? ..........................1 Specifications ................................ 2 Mounting the TruVu™ ET display ..........................4 Wiring the TruVu™ ET display ............................. 6 Wiring for power ..............................6 Wiring for Communication - Rnet configuration ....................7 Wiring for Communication - Ethernet port connection ................... 9 Wiring for Communication - USB port connection ...................

  • Page 4: What Is The Truvu™ Et Display

    What is the TruVu™ ET display? The TruVu™ ET display is a touchscreen device that you can attach to all Carrier Open controllers to view or change its property values, schedule equipment, view trends and alarms, and more, without having to access the system's server.

  • Page 5: Specifications

    32 GB onboard eMMC Flash memory to store program code and screen file Mounting Wall or panel mounting within the building interior Wall mounting kit (7” and 10” only) TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 6 72 hours after loss of power (at room temperature) Device identification The serial number is found on a label on the back of the TruVu™ ET display TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 7: Mounting The Truvu™ Et Display

    Punchout Size, Width x Height TruVu™ ET display-7 6.9 x 4.646 in. (17.5 x 11.8 cm) TruVu™ ET display-10 9.607 x 6.26 in. (24.4 x 15.9 cm) TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 8 Refer to the drawings below to determine the proper mounting holes to use for each size TruVu™ ET display. Use the screws provided to mount the backplate or to the VESA bracket. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 9: Wiring The Truvu™ Et Display

    24 VAC power supply using a NSA-A/PS24-24V-S low voltage power supply NOTE Must be within 100 feet (30 meters). WARNING Do not apply line voltage (main). CAUTION The TruVu™ ET display can share a power supply with the Carrier controller as long as: • The power supply is DC power.

  • Page 10: Wiring For Communication - Rnet Configuration

    CAUTION The TruVu™ ET display can share a power supply with the controller as long as: • The power source shared by the controller and TruVu ET display is DC power. • The same polarity is maintained. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 11 Wiring the TruVu™ ET display • The power source is used only for Carrier® controllers. CAUTION If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. TruVu™ ET Display (part# EQT3) ©2022 Carrier.

  • Page 12: Wiring For Communication - Ethernet Port Connection

    The TruVu™ ET display remembers this selection the next time the interface is powered on. To change the connection type, wait until the interface is attempting to connect and tap Cancel. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 13: Setting Up The Truvu™ Et Display

    To edit the touchscreen settings Changes to the display are made on the Quick Settings pane. To display the pane, swipe down from the top of the touchscreen. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 14 When the device has been inactive for the time set, the screen darkens and the user is logged out. NOTE Use the Extended Screen Timeout to set longer screen timeouts. See TruVu™ ET display screens (page 16). TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 15: To Update The Touchscreen

    The cache must be cleared before a file appears on the device. If a file already appears on the device, go to the Quick Settings pane, and tap App Restart before proceeding to the next step. When the view file begins loading, tap Cancel. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 16: To Update The Device Language

    Tap OK to clear the cache. To update the device language On the System screen in Settings, click Languages. Select the desired language. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 17: Working With Files

    To open the .pdf viewer, click the PDF Viewer icon. Browse to the desired file either on the USB drive or that have been copied to the TruVu™ ET display using Copy Files. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 18: Copying Files

    Display the Quick Settings pane by swiping down from the top of the touchscreen. Click the File Copy icon. Browse to the desired file on the USB drive and click OK. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 19: Truvu™ Et Display Screens

    A user logged in with the User, Admin, or Factory password Admin A user logged in with the Admin or Factory password Factory A user logged in with the Factory password No password Anyone TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 20 Module Status, Schedule, Browser, Trends, or Alarms screen. Touch the camera ( ) to capture a screenshot (page 14). Settings Touch an option to jump to Module Settings, Application Settings, or to change the current user. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 21 Touch an option to jump to the Set Time and Date, Communication, Router, IP, or Time Master screen. Set Time and Date Touch the time or date field to edit it. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 22 NOTE This setting should only be changed on the highest addressed device on the MS/TP network. There is no need to change it on any other device. Carrier recommends setting the Master to the address of that device, or one higher.
  • Page 23 Lets you view or edit the router's ARC156 or MS/TP network number. Touch a field to tap in the new number on the keypad. NOTE BACnet Ethernet network support will be added in a future release. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 24 TruVu™ ET display screens Screen name Description OPN Controllers NOTE IP Network would typically be1600. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 25 XT or TruVu™ Controllers Lets you view or edit network addresses and the UDP Port. Touch a field to tap in the new number on the keypad. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 26 If such an entry is found, the BACnet Time Master mode is set for Local Broadcast. Otherwise, the mode defaults to Disabled/None. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 27 Lets you access information about the app, select which language to use for the TruVu™ ET display system screens, and adjust your timeout settings. About Displays information about the TruVu™ ET display. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 28 Extended Screen Timeout Allows you to select the time until the TruVu™ ET display screen powers off, and the user is logged out. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 29 Screen name Description Update Interval Carrier recommends leaving these values at the default settings that appear in the image above. Inactivity Timeout Allows you to select the number of minutes of inactivity until the Standby screen appears and the user is logged out. If the TruVu™ ET display screen is not accessed, the Standby screen remains until Screen Timeout.
  • Page 30 TruVu™ ET display screens Screen name Description Module Status Module Status provides information about the controller, its firmware, and network information and communication status, and error conditions. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 31 Touch any of the above options to see that type of BACnet objects found in the controller. Or, you can touch View All Objects to see them all. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 32 Below is an example of the AI BACnet objects in the controller. The screen shows the BACnet object name, current value, and BACnet object instance number. Touch an object in the above screen to see the details shown below. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 33 TruVu™ ET display screens Screen name Description Trends Lets you view trends for points that have trending enabled. See Viewing trends (page 35). TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 34 TruVu™ ET display screens Screen name Description Alarms Lets you view alarms from the controller. See Viewing alarms (page 33). TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 35: Setting Timeouts

    ET display screens (page 16) NOTE If the Inactivity Timeout is set for a shorter time than Screen Timeout, the user is logged out before the device goes to sleep. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 36: Viewing Alarms

    The alarm is added to the Active Alarms or Active Faults screen. See the table below. To view alarms • Touch to see Active Alarms. • Touch on the System screen to see current alarms. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 37 Manually cleared See alarms that you cleared using the Clear Active button. Delete all active alarms. NOTE The TruVu™ ET display can hold up to 100 alarms. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 38: Viewing Trends

    (up to 4 points). Touch View Trends. Pinch-zoom the graph to zoom in and out. Touch Reset zoom to restore the graph to its original state. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 39: Creating Or Viewing Schedules

    ON Schedule only–Select one of the following: • Normal for a typical occupied period • Override for a occupied period that is to override an OFF schedule. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 40 Following the instructions above, create a weekly schedule for the first period. The schedule name is saved as Weekly Schedule. In the Daily view, touch Weekly Schedule or the green bar beside it. Touch Add Period. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 41 NOTE You can also add a period to a Weekly Schedule by touching Add Schedule and adding another weekly schedule. When you save it, it is appended to the existing weekly schedule as a separate period. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 42: To View Schedules

    TIP Quickly tap the screen 3 times with one finger to zoom in. Select... To see... Monthly Which days in the current month have schedules (indicated by green boxes). (default view) TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 43 ON Schedule or Off Schedule. If you need to change any of these settings, delete the schedule and then make a new one. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 44: Forcing Values (Ccn Points Only)

    NOTE When editing a numerical value, Auto releases the force back to the systems automatic setting. • Binary values such as check boxes or text toggles TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 45: Compliance

    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.

  • Page 46: Document Revision History

    Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not listed. Date Topic Change description Code* No changes yet * For internal use only TruVu™ ET Display (part# EQT3) ©2022 Carrier. Installation and Start-up Guide All rights reserved.
  • Page 47 Carrier ©2022 · Catalog No. 11-808-687-01 · 7/5/2022...

This manual is also suitable for:

Truvu et display10Eqt3

Table of Contents