Recording; Basic Recording - JVC GR-FXM16EG Instructions Manual

14
EN
LENS COVER Open/Close Ring
EJECT Switch
Recording Start/Stop Button
Power lamp
Tally lamp
(lights while recording is in progress)
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
AUTO
(Full Auto mode):
Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.
Power Switch
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.

RECORDING

NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power ( pg. 6)
Recording Mode Setting (
Tape Length Setting (
Grip Adjustment (
Viewfinder Adjustment (
1
LOAD A CASSETTE
First open the LCD monitor to an angle of over 60
degrees.
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press the Close
button to ensure the holder is closed and locked.
Shooting While Watching The Viewfinder
2
ENTER RECORD-STANDBY MODE
Make sure the LCD monitor is closed and locked.
Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the Power Switch to "CAMERA"
("AUTO" or "PRO.").
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
3
START SHOOTING
Press the Recording Start/Stop Button.
•" " appears in the viewfinder while recording is
in progress.
PRO.
(PRO. mode):

Basic Recording

pg. 10)
pg. 10)
pg. 12)
pg. 12)
OFF:
Allows you to switch off the
camcorder.