Troubleshooting - JVC Everio GZ-HM30 User Manual

Troubleshooting

If you encounter problems with this unit, check the following before requesting service.
1 Refer to "Trouble" below.
2 Refer to the "Troubleshooting" section in the "Detailed User Guide".
If you have difficulties operating the unit, refer to the detailed descriptions in the
"Detailed User Guide".
http://manual.jvc.co.jp/index.html/
0
You can also access the website from the supplied CD-ROM. (p. 19)
0
3 Refer to the FAQ of new products on JVC's website.
http://www.jvc.com/
0
4 This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
A Turn off the power. (Close the LCD monitor.)
B Remove the AC adapter and battery pack from this unit, reattach them, and
this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
Trouble
POWER/CHARGE lamp
starts blinking when the
monitor is closed.
Recording cannot be
performed.
Recording stops
automatically.
No date/time display.
Sound or video is
interrupted.
The battery pack is being charged.
0
Set to the recording mode with the L (Play/
0
Record) button.
Turn off this unit, wait for a while, and turn it on
0
again. (This unit stops automatically to protect the
circuit when the temperature rises.)
Recording stops automatically after 12 hours of
0
continuous recording.
Set "ON-SCREEN DISPLAY" in the playback
0
menu accordingly.
Sometimes playback is interrupted at the
0
connecting section between two scenes. This is
not a malfunction.
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
Action Page
6
13
-
-
-
-
23