Turntable Reset Function; Screen-Out Function - Toshiba Ml-Em45P Instruction Manual

16. TURNTABLE RESET FUNCTION

When cooking finished, if the turntable is not at the initial position, it will enter the turntable
reset function. At this time, the lamp, fan and turntable are working, "
display. After the turntable has reset, the oven stops cooking and reminds cooking is finished.
This function only works for one completed cooking. If pause or open the oven door
a
during cooking, the current cooking cannot enter the turntable reset function.
In waitting state, press number key "5" for 3 seconds, there will
be a long "beep" and the turntable reset function is turnned
b
off. To turn on the turntable reset function, in waiting state
press number key "5" for 3 seconds, there will be a long "beep"
denoting that turntable reset function is released.
• Under the reset state, opening the door or " STOP/Cancel " button is pressed,
the oven will go back to waiting state.
NOTE
• The function will be reserved after power loss.

17. SCREEN-OUT FUNCTION

In standby, click the "STOP/Cancel" key(less than 3 seconds,
and lift the button to respond, because " STOP/Cancel " has
a
already attached 3 seconds long pressing the child lock event,
so you must click and lift to respond) into the black screen save
electricity mode.
Under the child lock, click the "STOP/Cancel" key(less than 3
b
seconds, and lift) into the black screen save electricity mode.
Other modes other than the above can not enter the power saving mode, and can not
c
enter the black screen power saving mode under the opening the door.
EN-30
" will dynamic